GPS tracking
A tracker on the machine shows where it is right now, and where it's been. Nobody has to log anything by hand.
- Proof-of-Work
- Insight

A tracker on what drives. A beacon on what's pulled.
Anything with an engine gets a tracker. Implements get a small beacon, and the tracker on the machine pulling them reads it. So you see both the machine and what it's doing.
Examples below. The tracker fits any machine with an engine, the beacon any implement.
Tracker
-
Orchard tractor -
Tractor -
Forestry machine
Beacon
-
Baler -
Sprayer -
Seed drill
More than a dot on a map
1 / 11
Run the fleet from one screen
Every machine with its current position, on your desktop or your phone. Send the crew to the right spot, see who's nearest, and find them fast. For example when lunch needs to go out, a tank needs diesel, or the grain cart has to meet the combine to unload.

2 / 11
Where it went, hour by hour
Play back any machine's route, hour by hour. Each machine gets its own color, so you can tell them apart on the same map. It's the operations manager's view: spot driving patterns, see where the time went, and find out why a job ran late.

3 / 11
Draw the yard, the field or the site
Mark an area on the map. When a machine crosses the line, it's logged with the time, and the people you chose get told. You decide whether you want a heads-up on arrival, on departure, or both.

4 / 11
The tractor and what it's pulling
A Bluetooth beacon on the implement tells the tracker what's attached. So the record shows not just where the tractor was, but what it was doing there.

6 / 11
Speed map
See the speed a machine held on a job, colored on the map against the speed you set as optimal. Too fast, too slow and on target are easy to spot.

7 / 11
Machine groups
Group vehicles and implements together for easy filtering. One click, and the map only shows the crew you're looking for.

8 / 11
Restricted access
Decide who can see which machines. Untick a machine for a role, and it's gone from their map.

9 / 11
Winter service
Keep track of the fleet, see when each property was visited, and pull up the roads you drove, going back in time.

10 / 11
Fit it yourself
Two wires, red and black. Connect them straight to the battery, or wire the tracker in the cab. No technician needed. Once it's on, the machine shows up on your map.

11 / 11
Field profitability
We log working time in the field and the transport to and from it, field by field. With a cost per hour on top, you see what each field really costs, and can work out what it earns.

Area covered
Acres and hectares for each machine, worked out from its GPS track and working width. No field boundaries needed.

Two bits of kit
-
GPS tracker
See pricesGoes on any vehicle: tractor, truck, car, combine or ATV. Connects to the battery, SIM already inside.
- IP67 water- and dustproof casing
- 128 MB memory, stores up to 30 days without a connection
- 2G and 4G, also out in the countryside
- SIM installed, data included in the subscription
-
Bluetooth beacon
See pricesGoes on any implement: trailer, cultivator or seeder. Screwed or strapped on, running on its own battery.
- IP67 water- and dustproof casing
- Battery life of more than 5 years
- Bluetooth Low Energy
- Works with the GPS tracker
60-day money-back guarantee on hardware.
Questions
-
What if there's no signal where the machine is working?
The tracker keeps recording and stores up to 30 days, then sends it all when the signal's back.
More in the FAQ -
What do I need per machine?
A GPS tracker on each vehicle, and a beacon on each implement you want to tell apart.
More in the FAQ -
Who fits the tracker?
You do. Two wires, red and black, straight to the battery or wired in the cab.
More in the FAQ
- GPS trackers for farm equipment and heavy machinery
- Job tracking and planning
- Storage management
- Health and safety checklist
- ERP integration

