Coming soon
Scheduled maintenance for machines and vehicles: service reminders on engine hours, intervals or dates
Scheduled maintenance is coming soon to FarmBackup. Each machine gets its own service checklist with a how-to for every point, your team ticks off the work on their phone, and you get a reminder when the next service is due: on engine hours from the GPS tracker, on a fixed interval or on a fixed date. Fewer breakdowns in the season, and a full service history for every machine.
Coming to both Task and Tracking.

Service on time, not from memory
Industries
Maintenance for farms, contractors, forestry and vegetation management
Every fleet needs servicing. What differs is how hard the machines run, and when.
-
Agricultural contractor
Machines running for customers in the season, serviced on the hours they actually ran
-
Crop farm
The combine and the sprayer ready before the busy weeks
-
Livestock farm
Feed and slurry machines that run every day, serviced on time
-
Specialty crops
Many smaller machines and implements, each on its own schedule
-
Forestry
Hard-working forestry machines, serviced before they break down far from the workshop
-
Vegetation management
Mowers and small machines across many sites, none of them forgotten
1 / 5
A service checklist for each machine, with a how-to for every point
Pick the machine, and the full service list comes up: what to change, adjust, tighten or grease. Each point has a short how-to, so a new employee can do the winter service without searching through a worn manual or waiting for the one person who knows. Set up a checklist for each machine type, with your own points.

2 / 5
Tick off each point, and the service is documented
Your team ticks off each point on their phone as it's done. A winter service is a long list, and the ticks make sure nothing is forgotten. When the service is done, it's saved to the machine with the date and the engine hours, so you know what was replaced and what was greased.

3 / 5
Service reminders on engine hours, intervals or fixed dates
Get a reminder when a machine is due. Service on engine hours uses the hours the GPS tracker logs as the machine runs, so nobody has to read the hour meter. No tracker? Enter the hours by hand. A fixed interval, like every six months, or a fixed date, like every year on 1 October, works too.

4 / 5
Service on implements too, with hours from the beacon
Balers, mowers and seed drills need servicing too, not just tractors. A beacon on the implement tells the tracker when it's hitched up, so FarmBackup knows how many hours each implement has run and can remind you when it's due, just like the machines.

5 / 5
A full service history for every machine, also when you sell it
Every service is saved with the date, the engine hours and what was done, along with what it cost. You keep track of the whole fleet, and when a machine is sold, a documented service history is worth having.

From one of our customers
A missed 50-hour service, and a combine standing still for two days
At one of our customers, a scheduled service after 50 engine hours was missed. The combine broke down, and because the spare part had to come from far away, it stood still for two days. With a reminder on the hours from the GPS tracker, the service would have been caught in time.
What our customers ask for
- A service checklist for each machine, with a how-to for every point
- Ticks and a service history, for the fleet and for resale
- A reminder on engine hours, intervals or fixed dates
- Service on implements, not only on tractors
Questions about scheduled maintenance
-
When will scheduled maintenance be ready?
It's coming soon. Email [email protected], and we'll let you know when it's ready.
-
Do I need a GPS tracker?
No. With a tracker, the engine hours are counted automatically. Without one, you enter the hours by hand, or use a fixed interval or a fixed date.
-
Can a service fall due on a date, not only on hours?
Yes. A service can fall due on engine hours, on a fixed interval, like every six months, or on a fixed date, like every year on 1 October.
-
Does it work for implements?
Yes. With a beacon on the implement, FarmBackup knows its hours, and the service works the same way as on the machines.
-
Can we make our own service checklists?
Yes. You set up a checklist for each machine type, with your own points and a how-to for each one.
-
Will it be part of Task or Tracking?
Both. You'll reach scheduled maintenance from Task and from Tracking.
Want to hear when scheduled maintenance is ready?
Email us at [email protected], and we'll let you know as soon as it's ready. Or book a demo to see what FarmBackup does today.